Advantage Chemicals offer a range of advanced surface treatment technologies to clean and convert a variety of metal & plastic surfaces prior to painting. Any finish, no matter how expertly applied is wasted unless applied to a clean, pre-treated surface. Our pre-treatment and cleaning products are designed to be eco-friendly aqueous based solutions to comply with current environmental legislation, enhance sustainability and reduce costs.
These products are used to achieve the following:
Our wealth of experience combined with the latest chemicals results in our ability to deliver the optimum pre-treatment solution; Zinc Phosphate, Iron Phosphate or Zirconium Phosphate providing conversion coatings on Steel, Aluminium or Zinc.
PLASCLEAN NMO (0904) is an acidic degreaser/cleaner specifically designed for use generally in stage 2 of five/six stage spraywashers for treating all types of plastic parts prior to painting.
PLASCLEAN NMO is highly effective on mould release agents (both EMR & IMR) and other oil and grease contamination.
ADclean 510 (0910) is a concentrated liquid cleaner for use, when diluted, on metals and plastics in multistage spray-washing machines. It is nitrite and silicate free. It contains foam control agents (temperature dependent) and corrosion inhibitors along with excellent cleaning capabilities. As a neutral cleaner the diluted cleaning liquid can be disposed of down a foul drain.
Metal Pre-treatment, Corrosion Protection & Cleaning
ADbond 100 (0634) Is a carefully formulated liquid iron phosphate cleaner. It has been formulated to simultaneously degrease and phosphate mild steel components prior to painting operations.
Adbond 100 series
ADbond 200 (0635) is a combined cleaner/Zirconium-based Pre-treatment chemical which when diluted in warm water will simultaneously degrease and form a protective Zirconium conversion coating on aluminium, zinc and steel surfaces. It imparts a significantly greater durability to total systems on steels than conventional single stage cleaner/coaters. It is especially designed for Immersion systems.
Adbond 200 series
ADbond 201 (0642) is a combined cleaner/Zirconium-based Pre-treatment chemical which when diluted in warm water will simultaneously degrease and form a protective Zirconium conversion coating on aluminium, zinc and steel surfaces. It imparts a significantly greater durability to total systems on steels than conventional single stage cleaner/coaters. It can be used by Spray (Line or Chamber/Washing machine) or Immersion systems.
ADseal 100 (0637) Is a rinse inhibitor for Ferrous metals.
ADseal 100 is added to a final rinse after cleaning, de-rusting or iron phosphating, to inhibit rust staining during slow drying-off. It can provide temporary corrosion inhibition and It evaporates at approximately the same rate as water leaving virtually no residue, allowing the parts to be further processed or over-painted.
ADclean NE103 (0636) A nitrite-free, concentrated detergent additive for ADbond phosphate systems and neutral liquid cleaner developed to replace alkali and emulsion cleaners in single or multiple stage power washers, combining a carefully balanced, low foam synthetic detergent system produces excellent cleaning characteristics.
ADclean CC105 (1232) Is a Heavy duty industrial cleaner blend of alkalies and organic surfactants, with controlled foam levels.
ADclean AC200 (1133) A strongly acidic liquid product which when diluted with warm water will quickly remove plant scale and is particularly effective in hard water areas.
Corrosion protection and closed circuit flushing
ADhib CH1 (0450) A low toxicity multi-metal neutral pH corrosion inhibitor. Excellent corrosion control for most common metals of construction including steel, cast iron, copper, brass and aluminium.
ADclean MP 109 (1330) Is a mildly alkaline - low foam cleaner formulated to produce highly effective soil removal from a wide range of ferrous and non-ferrous metals.
ADclean MP 109 is Ideal for use by spray or power wash applications, and contains a corrosion inhibitor system designed to prevent attack on sensitive metals such as zinc and aluminium and also provide protection after processing.
The product also incorporates efficient water conditioners even in hard water areas so that performance is maintained.
ADflush 100 (1240) Is a non-acidic corrosion debris remover for closed circuit systems.
ADflush 100 has a unique Wetting action to penetrate, loosen and dissolve corrosion deposits, and mobilises other sludge’s in the system.
The product is non corrosive and suitable for multi-metal systems including those containing aluminium.
Welcome to Advantage Chemicals : Suppliers of High Quality Chemicals to the Automotive and Industrial Sectors
Advantage Business Park Spring Lane South
Malvern Worcestershire WR14 1AT
TEL: +44 (0)1684 561400
FAX: +44 (0)1684 567700
Accredited to ISO 9001:2015
& ISO 14001:2015
Advantage Chemicals Ltd applies to the GDPR Legislation.
website design ROCKET